How To Build a Massive Wings In Minecraft Complete Guide
Today we are Show’s you How To Build a Massive Wings In Minecraft Complete Guide step by step.
After the loud roar of my creeper and my flying pig, people started asking me how I made those wings. It may seem impossible to start building these big wings, but they are very simple. In fact, the wings in the creeper are the first wings I ever built. Of course, if you are not a skilled builder (especially terraforming), building wings can still be a big challenge, but this guide should help you a lot.
The easiest way to start building your wings is to start creating the 2D wing frame you want. This will give you a good idea of how big your wings will be, how light they are and you will be able to make a simple and quick change in your design.
After all, the shape of your wings can be a major challenge, since how do you create certain wing structures? Experienced designers, pixel artists or other people who work with a lot of drawings will probably be able to create a good wing shape, but for those who do not know how to do this, there is a very simple solution.
Just copy the existing wing shape. This will only work for 2D images, but that’s exactly what we’re following.
Just search on Google to find any winged images, perhaps pixel art pixels. Pokemon and other such programs often have very simple pixel versions, which can be easily copied.
Make sure you get an image with clear pixels, as you will copy those pixels to minecraft by inserting each pixel by block, as shown in the image below.
And make sure the wings are as straight forward as possible, as any sharp angle will make the minecraft type look strange, unless you stretch the wings yourself.
3D Wire Frame
Now that we have our 2D frame it’s time to turn it into a 3D phone-like frame. This will be the base of our entire wing and will better define the shape of our wing, although I often make small changes while removing the wings.
Creating this 3D cable frame is very easy, all you have to do is change the location of our 2D frame blocks.
However, make sure you use the right positions for each part of the unit. The upper bouts featured two cutaways, fore and aft, and the lower bouts featured two cutaways, fore and aft.
Minecraft wing building lessoninecraft wing building unit imageinecraft wing building lesson
Once you have completed this 3D wire frame the effect is already forming and you can start to see what it will look like.
However, the real challenge starts now, as the next few steps will have many times when your wing will look awesome and weird, but don’t despair, just keep going and the wing will start to look good when you reach the end.
Add Depth layer
Just filling in all the emptiness of our wings will make it look flat and scary, so we have to add depth and make sure everything goes smoothly with each other.
This is not a difficult process, although it can be time consuming and frustrating, especially if it seems that your wing is starting to look worse and worse, but sticking to it, it will start to look better as we go along.
I usually start by circling all the edges of our 3D phone frame and stretching it inside by 2 blocks, but 1 block is much deeper than our edge.
This will look strange once you have finished the whole wing, but this is a good step to find problem areas in the wings, which are usually corners and areas where 2 different depths meet.
Some parts of the wing will not look right if you use a layer that is 2 blocks long, so I use 2 layers of 1 block, each time I move a deeper block.
After you have completed this step it is time to slow things down a bit. Make problem areas look better by making the transition between different depths easier.
The wings will start to look good now, even though they are far from finished.
One layer of depth is not enough to make the wings look impressive and flat, so we continue to build on our depth by adding another layer.
The length of this layer depends largely on the shape of the wings, but at the top of the wings there are usually long, deep layers, while the tips of the wings and other parts such as the wing feathers will have a very deep increase every 1 or 2 blocks.
At the moment we simply stretch the wing with 2 more blocks, with increased depth. The next step will determine our maximum depth and overall composition of our layers.
Reach The Desired Depth
We cannot continue to add layers to the depth parts, this will make the wings look weird and awesome. So we put something where we build all our layers.
Depth will not be the same for all of our layers, as you continue to move from this layer, it will be much deeper.
However, this will make the wing look more impressive and make it appear that it is less part of a moving creature.
To build this high depth I usually create a large straight pole at the top of the wing, usually about 4-6 blocks deeper than our upper layer, but again, this depends on the shape of your wing.
Some may need only 3, while others can do with 7 layers of depth.
However, the shape of the wing should follow the shape of your wing, it does not have to be straight, but the round shape will look awesome on the angel-wing wing, as the angel-shaped shape will look strange on the bat’s wing.
The length of this fabric is 25-50% of your wing, usually only where the tips of the wings such as the feathers begin.
Now that we have decided on which point to build our wing, all we have to do is actually build on that point. This step is not very difficult, just repeat step 4 until you have finished all parts of your wing.
Once you have connected everything, the wing may appear abnormal, which means that you will have to expand the wing sections slightly by changing.
The depth layers and generally making all the layers part of the entire wing, rather than the different parts of the collection.
Smooth out any changes in depth by making the change slow down or perhaps even escalate in other areas.
Play and try it until you have fun. If you can’t make it look good, just burn it (if you use wool), enjoy the fire and start over. Practice makes perfect.
While making your wings look smooth, make sure that depth changes do not occur in the same areas on each layer, instead, add a few blocks to expand one layer, or part of the layer, to make everything look natural and smooth, as shown in the picture below.